At TomTom, we're all about helping you get around. That's why we use cookies to improve our sites, to offer information based on your interests and to interact with social media. If you're OK with this, you can continue using our sites.

> Decline
How can we help you?

Find products, services and support

All resultsAll results
MyDrive

Manage your routes and view traffic information.

MyDrive
MySports

View your sports workouts

MySports
Account
Login
Account
Logout

Your satnav might be affected by the upcoming GPS Week Number Rollover. To check your device, please click here.

How do I remove and insert the Batt-Stick on my Bandit?

Click here to see which products/categories this applies to.

Removing the Batt-Stick

To remove the Batt-Stick, follow these steps:

  1. Press the release lever of the Batt-Stick.
    Image
  2. While holding the lever turn the cap anti-clockwise until you see two dots aligned.
    Image
  3. Pull the Batt-Stick out.
    Image

Inserting the Batt-Stick

To insert the Batt-Stick, follow these steps:

  1. Insert the Batt-Stick into the camera.
    Image
  2. Make sure the two dots align and are close together.
    Image
  3. Turn the cap clockwise to lock the Batt-Stick into the camera.
    Image

Important:
If you see only one dot when the Batt-Stick is inserted do not try to turn it. You must first put the Batt-Stick in the unlocked position before you can insert it correctly.
Image

To put the Batt-Stick in the unlocked position follow these steps:

  1. Hold the Batt-Stick and press the release lever while turning the cap anti-clockwise.
    Image
  2. When you see a dot and arrow to the left of the release lever the Batt-Stick can be inserted as described above.
    Image

Is this answer helpful?